{"title":"Fiber Optic Illuminators","description":"\u003cp\u003e\u003cstrong\u003eTeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/strong\u003e, a Japanese manufacturer of high-power industrial LED components and illumination systems.\u003c\/p\u003e\n\u003cdetails class=\"collection-lead\"\u003e\n\u003csummary\u003eRead more about this collection and how we ship\u003c\/summary\u003e\n\u003cp\u003eWe supply the REVOX SLG series of fiber optic illuminators to manufacturers, system integrators, universities, and research institutions across the United States. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office, and we confirm the shipping route and lead time with every quote.\u003c\/p\u003e\n\u003cp\u003eAn SLG is a light source unit that couples its output into a light guide, so the illuminated shape is determined by the fiber assembly rather than by the housing. That makes the same unit usable for spot, ring, line, and backlight geometries. If you need bare emitters instead of a complete light source, see our \u003ca href=\"\/collections\/cob-leds\"\u003eCOB LED emitters\u003c\/a\u003e and \u003ca href=\"\/collections\/smd-leds\"\u003eSMD LED emitters\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003ch2\u003eThe SLG lineup\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePosition in the series\u003c\/th\u003e\n\u003cth\u003eLED colors\u003c\/th\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-600V2 \/ SLG-600V2-FC\u003c\/td\u003e\n\u003ctd\u003eHighest-output, fastest-responding unit in the series, specified by REVOX as capable of replacing a xenon flash source\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eOptical feedback, 10-bit dimming, high-speed pulse, high-speed dimming switchover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-450TSL \/ SLG-450TSL-ST\u003c\/td\u003e\n\u003ctd\u003eThree-lamp red, green, and blue unit for very high brightness mixed-color illumination\u003c\/td\u003e\n\u003ctd\u003eRed, green, blue\u003c\/td\u003e\n\u003ctd\u003e8-bit and 10-bit dimming, high-speed pulse, optical feedback, dimming range switchover, color lock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150V-UV\u003c\/td\u003e\n\u003ctd\u003eNear-ultraviolet source for fine-defect inspection and fluorescence observation\u003c\/td\u003e\n\u003ctd\u003eUV 365 \/ 385 \/ 405 nm\u003c\/td\u003e\n\u003ctd\u003e10-bit dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150V-NIR\u003c\/td\u003e\n\u003ctd\u003eNear-infrared source for surface and internal inspection\u003c\/td\u003e\n\u003ctd\u003eNIR\u003c\/td\u003e\n\u003ctd\u003eOptical feedback, 10-bit dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150V-X \/ SLG-165V-X\u003c\/td\u003e\n\u003ctd\u003eRaised-illuminance version of the 150V\/165V units, specified by REVOX at roughly twice the illuminance of a 250 W metal halide source\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eOptical feedback, 10-bit dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150V \/ SLG-165V\u003c\/td\u003e\n\u003ctd\u003eGeneral-purpose high-output white units, specified by REVOX as exceeding a 250 W metal halide source\u003c\/td\u003e\n\u003ctd\u003eSLG-150V: white, red, green, blue \/ SLG-165V: white\u003c\/td\u003e\n\u003ctd\u003eOptical feedback, 10-bit dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150HSP3\u003c\/td\u003e\n\u003ctd\u003eVery fast pulsed source for strobe illumination\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue\u003c\/td\u003e\n\u003ctd\u003e10-bit dimming, high-speed pulse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSLG-150HSP2\u003c\/td\u003e\n\u003ctd\u003eVery fast pulsed source for strobe illumination\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003e10-bit dimming, high-speed pulse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDetailed specifications for each model are confirmed at the time of quotation. Custom configurations are also available on request.\u003c\/p\u003e\n\u003ch2\u003eChoosing between the SLG models\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum output and xenon replacement.\u003c\/strong\u003e If the application is currently lit by a flash lamp, or if the exposure time is so short that nothing else is bright enough, the SLG-600V2 is the starting point. It combines the highest output in the series with fast switching, which is the combination a flash replacement requires.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMixed-color and color-critical work.\u003c\/strong\u003e The SLG-450TSL drives red, green, and blue lamps in one unit, so the color point can be tuned to the sample instead of relying on a white source and filters. A color-lock function holds the mixed color once it has been set, which matters when the inspection threshold is based on hue rather than intensity.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUltraviolet and fluorescence.\u003c\/strong\u003e The SLG-150V-UV covers 365, 385, and 405 nm, the three bands most commonly used to excite fluorescence in coatings, adhesives, resins, and biological samples. Our application guide on \u003ca href=\"\/pages\/uv-leds-for-fluorescence-inspection\"\u003eUV LEDs for fluorescence inspection\u003c\/a\u003e explains how to choose among the three and how to pair them with emission filters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNear-infrared penetration.\u003c\/strong\u003e The SLG-150V-NIR is used where the feature of interest is below a surface that is opaque in the visible range. See \u003ca href=\"\/pages\/nir-leds-for-aoi\"\u003eNIR LEDs for automated optical inspection\u003c\/a\u003e for how NIR illumination changes contrast, and note that silicon sensors lose sensitivity above roughly 1,100 nm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStrobe and high-speed capture.\u003c\/strong\u003e The SLG-150HSP2 and SLG-150HSP3 are built for pulsed operation, for freezing motion on a moving line or for capturing several differently lit images in rapid succession. The HSP3 adds red, green, and blue to the white output of the HSP2.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMetal halide replacement.\u003c\/strong\u003e The SLG-150V, SLG-165V, and their -X variants are the direct answer to an existing discharge-lamp installation: LED output with instant on\/off, no warm-up drift, no lamp replacement interval, and optical feedback to hold the output steady as the device ages.\u003c\/p\u003e\n\u003ch2\u003eSpecifying the light guide\u003c\/h2\u003e\n\u003cp\u003eThe illuminator is only half of the system. The light guide determines the illuminated shape, the numerical aperture, and how much of the source output actually reaches the sample, so it has to be selected together with the unit. Tell us the geometry you need - spot, ring, line, or backlight - along with the working distance and the fiber assembly you already use, and we will confirm the combination before quoting.\u003c\/p\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eAutomated optical inspection and machine vision, fine-defect and scratch inspection on machined and coated surfaces, fluorescence inspection of adhesives and coatings, internal and subsurface inspection with near-infrared light, high-speed strobe imaging on moving lines, microscopy and laboratory illumination, and replacement of discharge-lamp and flash-lamp light sources.\u003c\/p\u003e\n\u003ch2\u003eRelated products and emitters\u003c\/h2\u003e\n\u003cp\u003eFor illumination of a full scan line, see our \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights\u003c\/a\u003e. For pulsed drive electronics, see our \u003ca href=\"\/collections\/led-drivers\"\u003ehigh-speed LED drivers\u003c\/a\u003e. For bare emitters across UV, visible, NIR, and SWIR, see all \u003ca href=\"\/collections\/machine-vision-led\"\u003emachine vision LED emitters\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePricing and lead time\u003c\/h2\u003e\n\u003cp\u003eAll products are quoted individually, because pricing depends on the model, LED color, control interface, and accessories. These light sources are built to order, so lead time depends on the configuration and on component availability, and we confirm it with every quote. Use the Request a Quote form on any product page, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e for non-standard requirements, or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese products are purchased in the United States from TeraPower LED. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site, so there is no need to order from Japan or import the devices yourself.\u003c\/p\u003e\n\u003cp\u003eFor more on our distributor status and frequently asked questions, see \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all REVOX light sources and drivers on our \u003ca href=\"\/collections\/illumination-systems\"\u003eillumination systems\u003c\/a\u003e page, or browse bare \u003ca href=\"\/collections\/led-emitters\"\u003eLED emitters\u003c\/a\u003e if you are designing your own illuminator.\u003c\/p\u003e","products":[{"product_id":"revox-slg-600v2-fiber-optic-illuminator","title":"REVOX SLG-600V2 \/ 600V2-FC - High-Output Fiber Optic Illuminator","description":"\u003ch4\u003eREVOX SLG-600V2 \/ 600V2-FC - High-Output Fiber Optic Illuminator\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-600V2 is the highest-output fiber optic illuminator in the SLG series, developed as an LED replacement for xenon flash lamps in inspection systems. REVOX publishes an output increase of more than eleven times that of its conventional LED fiber sources, and a 40% increase in light output over the previous SLG-600 generation with lower fan noise. With dimming at 50% or above, the light switches on and off in 1 µs or less, so it can be used as a high-speed pulsed source as well as a continuous one, and the high dimmer system can store up to eight dimming levels with their own emission times and step through them on an internal or external trigger. Light-output feedback is standard, which holds the set output over a stabilization time of up to 23,000 hours. The SLG-600V2-FC variant adds an internal five-position filter changer for wavelength selection. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: ultra-high-output LED fiber optic illuminator with high-speed pulse and high-speed dimming functions\u003c\/li\u003e\n\u003cli\u003eModels: SLG-600V2 and SLG-600V2-FC, the latter with a built-in five-position filter changer\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-Ø14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle\u003c\/li\u003e\n\u003cli\u003eLED color: white, correlated color temperature 5,500 K typical\u003c\/li\u003e\n\u003cli\u003eResponse: 1 µs or less for on and off switching with dimming at 50% or above, measured on external trigger input at maximum light setting; published as reference data, not a guaranteed value\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control; 1 channel\u003c\/li\u003e\n\u003cli\u003eLight-output feedback: standard. Setting the required stabilization time makes the unit calculate the maximum output it can hold for that period, with 23,000 hours published as the long-life reference condition\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 410 VA at 100 V input, 420 VA at 240 V input\u003c\/li\u003e\n\u003cli\u003eInrush current, typical: 40 A at cold start\u003c\/li\u003e\n\u003cli\u003eEarth leakage current: 0.5 mA max at AC 240 V, 60 Hz, 100% load\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to output, input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 0-40 °C, 20-80 %RH, no condensation; altitude 2,000 m maximum, AC overvoltage category II, pollution degree 2\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized\u003c\/li\u003e\n\u003cli\u003eMass: 6.6 kg or less for SLG-600V2, 6.9 kg or less for SLG-600V2-FC\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant; CE marking with safety standards EN61010-1 and EN62311-2008 and EMC standards EN61000-6-2, EN61000-6-4, and EN50581-2012\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-600V2-①②: ① filter changer (fitted = FC, omitted = blank), ② filter misalignment detection option (fitted = S, omitted = blank)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available for sizes outside the standard list\u003c\/li\u003e\n\u003cli\u003eFilters for the FC model: heat-resistant filters recommended by REVOX, changed by removing the front cover. Up to five are held in the changer, and the changer is controlled the same way as dimming\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord; the FC model also includes five filter brackets and eighteen fixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing xenon flash lamps in inspection systems that need LED life and stability without losing intensity\u003c\/li\u003e\n\u003cli\u003eHigh-speed pulsed illumination synchronized to a camera trigger, at 1 µs or less\u003c\/li\u003e\n\u003cli\u003eSequential multi-condition imaging using up to eight stored dimming levels on one trigger chain\u003c\/li\u003e\n\u003cli\u003eLong-run inspection where output must stay constant for thousands of hours, using light-output feedback\u003c\/li\u003e\n\u003cli\u003eWavelength-selective inspection and fluorescence work using the five-position filter changer\u003c\/li\u003e\n\u003cli\u003eRing, line, and straight light guide illumination for high-magnification or transmitted-light inspection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Illuminance figures published by REVOX are measured with a straight light guide of Ø8 mm bundle diameter and 1,000 mm length at maximum dimming, and are reference values rather than guaranteed values. Tell us your working distance, field size, camera, and trigger timing, and we will confirm the illuminator, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-600V2 is supplied as a system rather than a single part number. The illuminator, the light guide, and the ferrule adaptor are specified together, because the light guide bundle diameter, length, and output shape determine the illuminance you actually get at the workpiece. The filter changer and the misalignment detection option are specified at the time of order and cannot be added later in the field, so we work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on light guide selection, ferrule sizing, pulse timing, filter options, and feedback settings are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the filter changer and detection options and on the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800732893472,"sku":"SLG-600V2","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG-600V2.jpg?v=1792105238"},{"product_id":"revox-slg-450tsl-rgb-fiber-optic-illuminator","title":"REVOX SLG-450TSL \/ 450TSL-ST - RGB Mixed-Color Fiber Optic Illuminator","description":"\u003ch4\u003eREVOX SLG-450TSL \/ 450TSL-ST - RGB Mixed-Color Fiber Optic Illuminator\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-450TSL carries red, green, and blue LEDs in a single fiber optic illuminator and mixes them into one output, which gives a spectrum that can be tuned to the material instead of accepting the fixed spectrum of a white source. REVOX publishes a converted illuminance of more than ten million lux based on its own measurement method, making this the brightest mixed-color source in the SLG series. A color-lock function keeps the mixing ratio fixed while the overall level is dimmed, so the color balance established during setup is not lost when the operator changes brightness. The SLG-450TSL supports steady and pulsed operation with high-speed strobe and high-speed dimming functions, while the SLG-450TSL-ST is the continuous-output version for applications that do not need pulsing. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: ultra-high-brightness mixed-color LED fiber optic illuminator with three LED channels\u003c\/li\u003e\n\u003cli\u003eModels: SLG-450TSL with high-speed strobe and high-speed dimming, and SLG-450TSL-ST without them\u003c\/li\u003e\n\u003cli\u003eLED colors: red 622 nm, green 520 nm, blue 450 nm\u003c\/li\u003e\n\u003cli\u003eIlluminance: more than 10,000,000 lx, published by REVOX as a converted value based on its own measurement method\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-Ø12 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control\u003c\/li\u003e\n\u003cli\u003eDimming range and resolution: 0-100%, with 8-bit (256 levels) and 10-bit (1,024 levels) inputs\u003c\/li\u003e\n\u003cli\u003eControl inputs: manual dimming and Ethernet dimming\u003c\/li\u003e\n\u003cli\u003eAlarm outputs: temperature error, temperature warning, LED open error, LED short error, feedback error, and internal errors covering power supply fault, overcurrent, fan fault, and internal component overtemperature\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 435 VA at 100 V and 480 VA at 240 V for the SLG-450TSL; 420 VA at 100 V and 435 VA at 240 V for the SLG-450TSL-ST\u003c\/li\u003e\n\u003cli\u003eInrush current, typical: 40 A at cold start\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to output, input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 0-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -10-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling by fan, with side intake and rear exhaust\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until illuminance falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: D 280 x W 155 x H 200 mm\u003c\/li\u003e\n\u003cli\u003eMass: 6.0 kg or less for the SLG-450TSL, 5.6 kg or less for the SLG-450TSL-ST\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy with a semi-gloss leather-tone finish\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant and conforming to the Japanese Electrical Appliance and Material Safety Act; CE marking with safety standards EN61010-1:2010+A1:2019 and EN62311:2008 and EMC standards EN61000-6-2 and EN61000-6-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-450TSL-①: ① pulse capability (pulse specification = blank, continuous-output specification = ST)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual, a 2 m three-pin grounded AC cord, and a plug for the monitor terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInspection where contrast depends on wavelength, using a mixing ratio tuned to the material rather than a fixed white spectrum\u003c\/li\u003e\n\u003cli\u003eColor imaging that must stay color-stable while brightness is adjusted, using the color-lock function\u003c\/li\u003e\n\u003cli\u003eHigh-magnification inspection that needs extreme brightness through a fiber light guide\u003c\/li\u003e\n\u003cli\u003eStrobe and high-speed dimming applications synchronized to a camera, using the SLG-450TSL\u003c\/li\u003e\n\u003cli\u003eContinuous illumination at a fixed level, using the lower-cost SLG-450TSL-ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us your material, working distance, camera, and whether you need pulsed or continuous output, and we will confirm the model, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-450TSL is supplied as a system rather than a single part number. The pulse capability is fixed by the model you order, because the high-speed strobe and high-speed dimming functions cannot be added to an SLG-450TSL-ST afterwards. The illuminator, the light guide, and the ferrule adaptor are specified together, since the light guide determines the illuminance delivered at the workpiece, so we work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on color mixing, light guide selection, ferrule sizing, and strobe timing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the model, the light guide, and the ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800773493024,"sku":"SLG-450TSL","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG450TSL_in2__02.jpg?v=1792105863"},{"product_id":"revox-slg-150v-uv-fiber-optic-illuminator","title":"REVOX SLG-150V-UV - UV Fiber Optic Illuminator (365, 385, 405 nm)","description":"\u003ch4\u003eREVOX SLG-150V-UV - UV Fiber Optic Illuminator (365, 385, 405 nm)\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150V-UV is a near-ultraviolet fiber optic illuminator built around UV LEDs developed by REVOX, for fluorescence observation and for fine defect inspection where UV excitation produces contrast that visible light cannot. Three peak wavelengths are available as standard, 365 nm, 385 nm, and 405 nm, so the excitation can be matched to the fluorescent material or the resin being inspected. REVOX publishes an expected LED life of 30,000 hours, more than twenty times that of a UV lamp, which removes the lamp replacement and warm-up cycle from the inspection process. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: near-ultraviolet LED fiber optic illuminator\u003c\/li\u003e\n\u003cli\u003eLED peak wavelength, typical: 365 nm, 385 nm, or 405 nm, specified at the time of order\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° or 40° full angle, specified at the time of order\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, published by REVOX as more than twenty times the life of a UV lamp; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 170 VA\u003c\/li\u003e\n\u003cli\u003eEarth leakage current: 0.5 mA max at AC 240 V, 60 Hz, 100% load\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 5-40 °C, 20-80 %RH, no condensation; altitude 2,000 m maximum, overvoltage category II, pollution degree 2\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling\u003c\/li\u003e\n\u003cli\u003ePhotobiological safety: risk group 3. Appropriate eye and skin protection and interlocking are required in the installation\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized\u003c\/li\u003e\n\u003cli\u003eMass: approximately 3.9 kg\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2, EN61000-6-4, and EN62311\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150V-①-②③: ① peak wavelength (365 nm = 365, 385 nm = 385, 405 nm = 405), ② compatible fiber bundle diameter (Ø8-14 mm = M), ③ beam angle (30° = N, 40° = U)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator. UV transmission depends on the light guide material, so the light guide is selected together with the wavelength\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFluorescence observation and fluorescent penetrant inspection\u003c\/li\u003e\n\u003cli\u003eFine defect inspection on resin, film, and coated surfaces, where UV excitation raises contrast\u003c\/li\u003e\n\u003cli\u003eChecking fluorescent markers, adhesives, and coatings for presence, coverage, and uniformity\u003c\/li\u003e\n\u003cli\u003eUV curing and exposure work at small spot sizes through a light guide\u003c\/li\u003e\n\u003cli\u003eReplacing UV lamps in existing inspection stations, to remove warm-up time and lamp replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the fluorescent material or defect you are targeting, the working distance, and the camera and filter set, and we will confirm the wavelength, beam angle, light guide, and ferrule configuration. If you need wavelengths outside 365-405 nm, we also supply REVOX UV COB and SMD emitters at the component level.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150V-UV is supplied as a system rather than a single part number. The peak wavelength and the beam angle are fixed when the unit is built, and the light guide has to transmit the chosen wavelength, so the illuminator, light guide, and ferrule adaptor are specified together. We work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on excitation wavelength, light guide transmission, beam angle, and UV safety classification are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the wavelength, beam angle, light guide, and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/uv-led\"\u003eUV LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/uv-leds-for-fluorescence-inspection\"\u003eUV LEDs for fluorescence inspection\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800788074784,"sku":"SLG-150V-UV","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/slg-150v-uv_main.jpg?v=1792106052"},{"product_id":"revox-slg-150v-nir-fiber-optic-illuminator","title":"REVOX SLG-150V-NIR \/ NIRX - NIR Fiber Optic Illuminator (740-1,650 nm)","description":"\u003ch4\u003eREVOX SLG-150V-NIR \/ NIRX - NIR Fiber Optic Illuminator (740-1,650 nm)\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150V-NIR is a near-infrared fiber optic illuminator with eleven standard wavelengths from 740 nm to 1,650 nm, covering both surface inspection and transmitted inspection of the inside of a material. REVOX publishes an output more than twice that of a near-infrared halogen source for the 740, 850, 940, 1,060, 1,100, and 1,150 nm models, which is the practical reason to replace a halogen source: the same signal is available without the lamp's heat load, warm-up, and replacement cycle. The SLG-150V-NIRX is the higher-power variant for the longer wavelengths from 1,060 nm upward, where emitter efficiency falls and more drive power is needed. Dimming is 10-bit over a 0-100% range and can be driven manually, by analog voltage, by digital input, by RS-232C, or over Ethernet. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: near-infrared LED fiber optic illuminator\u003c\/li\u003e\n\u003cli\u003eStandard wavelengths: 740, 850, 940, 1,060, 1,100, 1,150, 1,200, 1,300, 1,450, 1,550, and 1,650 nm. The SLG-150V-NIRX covers 1,060 nm and above only\u003c\/li\u003e\n\u003cli\u003eOutput: more than twice that of a near-infrared halogen source at 740, 850, 940, 1,060, 1,100, and 1,150 nm, as published by REVOX\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: fiber OF diameter Ø8-Ø14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle for 740, 850, and 940 nm; 50° full angle for 1,300, 1,450, 1,550, and 1,650 nm; either for the wavelengths in between, specified at the time of order\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 115 VA for the SLG-150V-NIR and 165 VA for the SLG-150V-NIRX\u003c\/li\u003e\n\u003cli\u003eDimming range and resolution: 0-100% at 10-bit (1,024 levels)\u003c\/li\u003e\n\u003cli\u003eDimming control: manual dimming by panel rotary encoder; external dimming by DC 0-5 V analog, 8-bit digital, 10-bit digital, RS-232C serial, or Ethernet; dimming lock available when analog input is used\u003c\/li\u003e\n\u003cli\u003eAlarm outputs: LED overtemperature signal and LED error for open and short circuits\u003c\/li\u003e\n\u003cli\u003eLight-output feedback: available as an option (FB)\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until light intensity falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eLED replacement: handled by returning the unit to the factory\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current; forced cooling\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to output, input to FG): AC 1,500 V for 1 minute with a cutoff current of 10 mA or less, DC 500 V for 1 minute at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation, altitude 2,000 m or below\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003ePhotobiological safety by wavelength: risk group 3 at 740, 850, and 940 nm; risk group 2 at 1,060 and 1,100 nm; risk group 1 at 1,150 nm; not applicable at 1,200 nm and above\u003c\/li\u003e\n\u003cli\u003eConnectors: AC inlet, 3-pin EN60320-1 C14 type x 1; digital dimming input, D-SUB25 female x 1; serial dimming input, D-SUB9 female x 1; Ethernet dimming input, RJ-45\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy with red anodized finish; mass approximately 3.9 kg\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2, EN61000-6-4, and EN62311\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150V①-②-③④ or SLG-150V①-②X-③④: ① light-output feedback (fitted = FB, omitted = blank), ② LED wavelength (740 = 740 nm through 1650 = 1,650 nm), ③ bundle diameter (Ø8-14 mm = M), ④ beam angle (30° = N, 50° = M)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator. Transmission in the near-infrared depends on the fiber material, which matters most above 1,200 nm, so the light guide is selected together with the wavelength\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord rated at 125 V, 7 A maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInternal inspection of materials that are opaque in visible light but transmit in the near-infrared\u003c\/li\u003e\n\u003cli\u003eForeign-object detection in food, resin, and packaging, using wavelength contrast rather than shape\u003c\/li\u003e\n\u003cli\u003eMoisture and water-content imaging in the 1,450 nm and 1,550 nm bands\u003c\/li\u003e\n\u003cli\u003eFilm, adhesive, and coating inspection through a light guide at high magnification\u003c\/li\u003e\n\u003cli\u003eReplacing near-infrared halogen sources to remove heat load, warm-up time, and lamp replacement\u003c\/li\u003e\n\u003cli\u003eWavelength screening during process development, where several wavelengths are compared on the same optical setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Illuminance data published by REVOX is measured with a multi-component light guide of 1 m length and Ø10 mm OF diameter. Tell us your material, the wavelength you expect to use, the working distance, and the camera sensor, and we will confirm the model, wavelength, beam angle, light guide, and ferrule configuration. If you are evaluating wavelengths before specifying the illuminator, we also supply REVOX NIR COB emitters from 740 nm to 1,650 nm at the component level.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150V-NIR is supplied as a system rather than a single part number. The wavelength and beam angle are fixed when the unit is built, the choice between the NIR and NIRX platforms follows from the wavelength, and the light guide has to transmit that wavelength, so the illuminator, light guide, and ferrule adaptor are specified together. The light-output feedback option is also specified at the time of order. We work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the wavelength, the configuration, and component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on wavelength selection, camera sensor compatibility, light guide transmission in the near-infrared, and dimming control are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the wavelength, the NIR or NIRX platform, the feedback option, and the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/nir-cob-led\"\u003eNIR COB LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/nir-leds-for-aoi\"\u003eNIR LEDs for automated optical inspection\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800802689312,"sku":"SLG-150V-NIR","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/NIR_NIRX-3.jpg?v=1792106241"},{"product_id":"revox-slg-150v-x-165v-x-fiber-optic-illuminator","title":"REVOX SLG-150V-X \/ 165V-X - High-Output White Fiber Optic Illuminator","description":"\u003ch4\u003eREVOX SLG-150V-X \/ 165V-X - High-Output White Fiber Optic Illuminator\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150V-X and SLG-165V-X are the high-output versions of the SLG-150V and 165V white fiber optic illuminators, built for inspection stations where the existing LED fiber source simply does not deliver enough light. REVOX publishes an output of twice that of a 250 W metal halide source, which is the comparison that matters when a station is being converted from a discharge lamp. Two white types are standard: CWX for general inspection and DWX with high color rendering for color judgement and for operators working from the image. Light-output feedback is available on the FB models, which holds the set output as the LED ages instead of letting illuminance drift away from the inspection threshold. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: high-output white LED fiber optic illuminator\u003c\/li\u003e\n\u003cli\u003eModels: SLG-150V-X and SLG-165V-X, each available with light-output feedback as the FB version\u003c\/li\u003e\n\u003cli\u003eLED color: white, with CWX as the standard type and DWX as the high color rendering type\u003c\/li\u003e\n\u003cli\u003eOutput: twice that of a 250 W metal halide light source, as published by REVOX\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: fiber OF diameter Ø8-Ø14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 200 VA for the SLG-150V-X and 205 VA for the SLG-165V-X\u003c\/li\u003e\n\u003cli\u003eInrush current, typical: 15 A at AC 100 V and 30 A at AC 200 V, at cold start\u003c\/li\u003e\n\u003cli\u003eEarth leakage current: 3.5 mA or less at AC 264 V, 60 Hz, no load\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 5-40 °C, 20-80 %RH, no condensation; altitude 2,000 m or below, overvoltage category II, pollution degree 2\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling\u003c\/li\u003e\n\u003cli\u003ePhotobiological safety: risk group 3\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized; mass approximately 3.9 kg for the SLG-150V-X and approximately 5.1 kg for the SLG-165V-X\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant and conforming to the Japanese Electrical Appliance and Material Safety Act; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2, EN61000-6-4, and EN62311\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150V-X-①-②③, SLG-150VFB-X-①-②③, SLG-165V-X-①-②③, or SLG-165VFB-X-①-②③: ① LED color (standard white = CWX, high color rendering white = DWX), ② compatible fiber bundle diameter (Ø8-14 mm = M), ③ beam angle (30° = N)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available. C-mount lenses and lenses for transmission lights are also available on request\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord; filter retainers and retainer screws are supplied for filter positions that are not populated\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInspection stations where the existing LED fiber source is too dim and the optical layout cannot be changed\u003c\/li\u003e\n\u003cli\u003eConverting 250 W metal halide stations to LED without losing intensity\u003c\/li\u003e\n\u003cli\u003eColor judgement and operator-assisted inspection, using the DWX high color rendering type\u003c\/li\u003e\n\u003cli\u003eHigh-magnification imaging through ring or straight light guides, where light is lost in the optics\u003c\/li\u003e\n\u003cli\u003eLong-run inspection with fixed thresholds, using the FB light-output feedback versions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the illuminance you need at the workpiece, the working distance, and the current light source you are replacing, and we will confirm the model, white type, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150V-X is supplied as a system rather than a single part number. The white type and the feedback option are fixed when the unit is built, and the light guide determines the illuminance delivered at the workpiece, so the illuminator, light guide, and ferrule adaptor are specified together. We work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on output comparison with your current lamp, color rendering, light guide selection, and feedback settings are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the model, the white type, the feedback option, and the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800818811168,"sku":"SLG-150V-X","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG_150VX165VX-920x511.jpg?v=1792106441"},{"product_id":"revox-slg-150v-165v-fiber-optic-illuminator","title":"REVOX SLG-150V \/ 165V - White and RGB Fiber Optic Illuminator","description":"\u003ch4\u003eREVOX SLG-150V \/ 165V - White and RGB Fiber Optic Illuminator\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150V and SLG-165V are the standard white and color fiber optic illuminators of the SLG series, and the baseline most inspection stations start from. REVOX publishes an output above that of a 250 W metal halide source, with five standard colors on the SLG-150V: standard white, high color rendering white, red, green, and blue. A proprietary control method makes light output proportional to the dimming value, so a change on the dial or in the control command produces a predictable change in the image rather than a curve that has to be calibrated out. Every dimming interface is standard, including manual, analog, 8-bit and 10-bit digital, RS-232C, and LAN, and light-output feedback is available on the FB versions. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: white and color LED fiber optic illuminator\u003c\/li\u003e\n\u003cli\u003eLED colors: standard white (CW), high color rendering white (DW), red, green, and blue on the SLG-150V; standard white (CW) and high color rendering white (DW) on the SLG-165V\u003c\/li\u003e\n\u003cli\u003eOutput: above that of a 250 W metal halide light source, as published by REVOX\u003c\/li\u003e\n\u003cli\u003eLight output: proportional to the dimming value, by REVOX's own control method\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V ±10%, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical at maximum light: 200 VA for white and 160 VA for red, green, and blue on the SLG-150V; 205 VA on the SLG-165V\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: fiber OF diameter Ø3-7, Ø8-14, or Ø15-22 mm on the SLG-150V by changing the lens, at a 30° beam angle; fiber OF diameter Ø8-14 mm at a 30° beam angle on the SLG-165V\u003c\/li\u003e\n\u003cli\u003eFerrule and optics: adaptable to the ferrule makes and dimensions in common use, with conditions on the SLG-165V\u003c\/li\u003e\n\u003cli\u003eDimming range: 0-100%\u003c\/li\u003e\n\u003cli\u003eDimming control, all standard: manual dimming by volume control, DC 0-5 V analog, 8-bit digital, 10-bit digital, RS-232C serial, and LAN; dimming lock available when analog input is used\u003c\/li\u003e\n\u003cli\u003eAlarm outputs: LED overtemperature signal and LED error for open and short circuits\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until illuminance falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eLED replacement: handled by returning the unit to the factory\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling by fan\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eMass: approximately 3.9 kg for the SLG-150V and approximately 5.1 kg for the SLG-165V\u003c\/li\u003e\n\u003cli\u003eCompliance: CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2 and EN61000-6-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eSLG-150V, ordered as SLG-150V-①-②-③④: ① light-output feedback (fitted = FB, omitted = blank), ② LED color (standard white = CW, high color rendering white = DW, red = R, green = G, blue = B), ③ bundle diameter (Ø3-7 = T, Ø8-14 = M, Ø15-22 = L; T and L are not available with the FB version), ④ beam angle (30° = N, 60° = W; W is not available with the FB version)\u003c\/li\u003e\n\u003cli\u003eSLG-165V, ordered as SLG-165V-①-②-③④: ① light-output feedback (FB or blank), ② LED color (CW or DW), ③ bundle diameter (Ø8-14 = M), ④ beam angle (30° = N)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions. C-mount lenses and lenses for transmission lights are also available on request\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eGeneral machine vision inspection through straight, ring, and line light guides\u003c\/li\u003e\n\u003cli\u003eColor-selective inspection using red, green, or blue to raise contrast on a specific material\u003c\/li\u003e\n\u003cli\u003eColor judgement and operator-assisted inspection, using the DW high color rendering white\u003c\/li\u003e\n\u003cli\u003eReplacing metal halide and halogen fiber sources on existing stations\u003c\/li\u003e\n\u003cli\u003eControl-integrated installations that dim the light from a PLC or PC over analog, digital, RS-232C, or LAN\u003c\/li\u003e\n\u003cli\u003eSmall-bundle applications down to Ø3-7 mm on the SLG-150V, for borescope and high-magnification optics\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the bundle diameter, the color, the working distance, and how the light will be controlled, and we will confirm the model, lens, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150V and SLG-165V are supplied as systems rather than single part numbers. The LED color, the bundle diameter, the beam angle, and the feedback option are fixed when the unit is built, and some combinations are mutually exclusive: the FB feedback version does not support the Ø3-7 mm or Ø15-22 mm bundles or the 60° beam angle. The light guide and ferrule adaptor are specified together with the illuminator, so we work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on color selection, bundle diameter, lens changes, dimming interfaces, and feedback compatibility are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the model, LED color, bundle diameter, feedback option, and the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800829296928,"sku":"SLG-150V","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG_150V165V-920x511.jpg?v=1792106578"},{"product_id":"revox-slg-150hsp3-pulsed-fiber-optic-illuminator","title":"REVOX SLG-150HSP3 - Pulsed Fiber Optic Illuminator with Three Selectable Colors","description":"\u003ch4\u003eREVOX SLG-150HSP3 - Pulsed Fiber Optic Illuminator with Three Selectable Colors\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150HSP3 is a fiber optic illuminator built specifically for pulse control, with three LED channels in one housing. Any three of four colors can be specified - red, green, blue, and white - so one unit can drive three optical setups in sequence and a single camera can capture three imaging conditions at the same station. The minimum pulse width is 3 µs and dimming is 10-bit over a 50-100% range, controlled over Ethernet, with trigger input on a D-sub 9 connector. For applications that need three white channels rather than mixed colors, REVOX supplies the SLG-150HSP2 instead. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: pulse-dedicated LED fiber optic illuminator with three LED channels\u003c\/li\u003e\n\u003cli\u003eLED colors: any three of red, green, blue, and white. A white, white, white configuration is supplied as the SLG-150HSP2\u003c\/li\u003e\n\u003cli\u003eMinimum pulse width: 3 µs\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle\u003c\/li\u003e\n\u003cli\u003eDimming range and resolution: 50-100% at 1,024 levels\u003c\/li\u003e\n\u003cli\u003eDimming control: Ethernet\u003c\/li\u003e\n\u003cli\u003eFault detection: LED overtemperature and fan speed error\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption: 250 VA typical at maximum light\u003c\/li\u003e\n\u003cli\u003eWithstand voltage (input to output, input to FG): AC 1,500 V for 1 minute with a cutoff current of 10 mA or less, DC 500 V for 1 minute at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until illuminance falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eLED replacement: handled by returning the unit to the factory\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current; forced cooling by fan\u003c\/li\u003e\n\u003cli\u003eConnectors: AC inlet, 3-pin EN60320-1 C14 type x 1; Ethernet dimming input, RJ-45; trigger input, D-sub 9 socket\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized; mass 5.5 kg\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS and REACH compliant, PSE conforming; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2 and EN61000-6-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150HSP3-①-②: ① LED colors, three selected from white = W, red = R, green = G, blue = B, with X marking an unused channel, ② compatible fiber bundle diameter (Ø8-14 mm = M)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately, one per channel in most installations. Straight, ring, and line light guides are configured to the application, and light guides are not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord rated at 125 V, 7 A maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eCapturing three imaging conditions at one station with a single camera, by pulsing each channel in turn\u003c\/li\u003e\n\u003cli\u003eMulti-wavelength inspection where defect contrast differs by color, switched frame to frame\u003c\/li\u003e\n\u003cli\u003eHigh-speed inspection synchronized to a camera trigger at a 3 µs minimum pulse width\u003c\/li\u003e\n\u003cli\u003eConsolidating three separate illuminators into one unit where cabinet and station space is limited\u003c\/li\u003e\n\u003cli\u003eInspection cells controlled over Ethernet from a PC or vision controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the three conditions you need to image, the trigger timing, and the light guide shape for each channel, and we will confirm the color combination, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150HSP3 is supplied as a system rather than a single part number. The three LED colors are fixed when the unit is built and cannot be changed in the field, and each channel normally needs its own light guide and ferrule adaptor, so the illuminator and the light guides are specified together. Note also that the dimming range is 50-100% rather than 0-100%, because this is a pulse-dedicated design. We work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guides is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the color combination, the configuration, and component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on color combination, trigger timing, pulse width, Ethernet control, and light guide selection are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the color combination and on the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-drivers\"\u003ePulsed LED drivers\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800841716000,"sku":"SLG-150HSP3","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG-150HSP3.jpg?v=1792106740"},{"product_id":"revox-slg-150hsp2-pulsed-fiber-optic-illuminator","title":"REVOX SLG-150HSP2 - Pulsed Fiber Optic Illuminator with Three White LEDs","description":"\u003ch4\u003eREVOX SLG-150HSP2 - Pulsed Fiber Optic Illuminator with Three White LEDs\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150HSP2 is a pulse-dedicated fiber optic illuminator with three white LED channels in one housing, switched fast enough that a single camera can image three optical setups in sequence at one station. The minimum pulse width is 3 µs, and the unit can run from its own internal trigger at a set period or follow an external trigger, including a one-trigger one-scan mode and a one-trigger n-scan mode, each with configurable ON WAIT delay and LED ON time. Maximum luminous flux is 4,128 to 5,076 lumens depending on the LED specification. For applications that need mixed colors instead of three white channels, REVOX supplies the SLG-150HSP3. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: pulse-dedicated LED fiber optic illuminator with three white LED channels\u003c\/li\u003e\n\u003cli\u003eLED colors: white, white, white (WWW)\u003c\/li\u003e\n\u003cli\u003eMaximum luminous flux: 4,128-5,076 lumens, depending on the LED specification\u003c\/li\u003e\n\u003cli\u003eMinimum pulse width: 3 µs\u003c\/li\u003e\n\u003cli\u003eTrigger modes: internal trigger at a set period with ON WAIT and LED ON timing, external trigger in one-trigger one-scan mode using inputs TRIG1 to TRIG3, and external trigger in one-trigger n-scan mode using TRIG1\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: fiber OF diameter Ø8-14 mm\u003c\/li\u003e\n\u003cli\u003eDimming range and resolution: 50-100% at 1,024 levels\u003c\/li\u003e\n\u003cli\u003eDimming control: Ethernet\u003c\/li\u003e\n\u003cli\u003eFault detection: LED overtemperature and fan speed error\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption: 250 VA typical at maximum light\u003c\/li\u003e\n\u003cli\u003eWithstand voltage (input to output, input to FG): AC 1,500 V for 1 minute with a cutoff current of 10 mA or less, DC 500 V for 1 minute at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until illuminance falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eLED replacement: handled by returning the unit to the factory\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current; forced cooling by fan\u003c\/li\u003e\n\u003cli\u003eConnectors: AC inlet, 3-pin EN60320-1 C14 type x 1; Ethernet dimming input, RJ-45; trigger input, D-sub 9 socket\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized; mass 5.5 kg\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS and REACH compliant, PSE conforming; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2 and EN61000-6-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150HSP2-①-②: ① LED colors (white, white, white = WWW), ② compatible fiber bundle diameter (Ø8-14 mm = M)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately, one per channel in most installations. Straight, ring, and line light guides are configured to the application, and light guides are not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord rated at 125 V, 7 A maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eImaging three optical setups with one camera at a single station, using three white channels in sequence\u003c\/li\u003e\n\u003cli\u003eCombining bright-field, dark-field, and transmitted illumination on the same workpiece\u003c\/li\u003e\n\u003cli\u003eHigh-speed inspection synchronized to a camera or encoder trigger, at a 3 µs minimum pulse width\u003c\/li\u003e\n\u003cli\u003eFree-running inspection cells that need no external trigger source, using the internal trigger mode\u003c\/li\u003e\n\u003cli\u003eConsolidating three separate illuminators into one unit where station space is limited\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the three illumination conditions you need, the trigger source and timing, and the light guide shape for each channel, and we will confirm the configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150HSP2 is supplied as a system rather than a single part number. All three channels are white, each channel normally needs its own light guide and ferrule adaptor, and the dimming range is 50-100% rather than 0-100% because this is a pulse-dedicated design. The illuminator and the light guides are therefore specified together, and we work through the trigger scheme with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guides is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on trigger modes, pulse timing, Ethernet control, and light guide selection are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light guide and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-drivers\"\u003ePulsed LED drivers\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800854593824,"sku":"SLG-150HSP2","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG_150HSP2-920x511.jpg?v=1792106892"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/collections\/SLG-600V2.jpg?v=1792175770","url":"https:\/\/terapowerled.com\/collections\/fiber-optic-illuminators.oembed","provider":"TeraPower LED","version":"1.0","type":"link"}