{"title":"LED Line Lights for Line-Scan Inspection","description":"\u003cp\u003e\u003cstrong\u003eTeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/strong\u003e, a Japanese manufacturer of high-power industrial LED components and illumination systems.\u003c\/p\u003e\n\u003cdetails class=\"collection-lead\"\u003e\n\u003csummary\u003eRead more about this collection and how we ship\u003c\/summary\u003e\n\u003cp\u003eWe supply the REVOX SPX series of LED line lights to manufacturers, system integrators, universities, and research institutions across the United States. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office, and we confirm the shipping route and lead time with every quote.\u003c\/p\u003e\n\u003cp\u003eThese are complete illumination systems, not bare components. A line light is ordered together with its dedicated power supply and cable, and the light-emitting length, light distribution, and LED color are specified at the time of order. If you need bare emitters to build your own illuminator, see our \u003ca href=\"\/collections\/cob-leds\"\u003eCOB LED emitters\u003c\/a\u003e and \u003ca href=\"\/collections\/smd-leds\"\u003eSMD LED emitters\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003ch2\u003eThe SPX line light lineup\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePosition in the series\u003c\/th\u003e\n\u003cth\u003eLED colors\u003c\/th\u003e\n\u003cth\u003eControl\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003ca href=\"\/products\/revox-spx-ta200-led-line-light\"\u003eSPX-TA200\u003c\/a\u003e\u003c\/td\u003e\n\u003ctd\u003eFlagship high-performance model for line-scan cameras, with light-emitting lengths from 240 to 3,960 mm\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue, UV 365 \/ 385 \/ 405 nm, NIR 860 \/ 950 nm\u003c\/td\u003e\n\u003ctd\u003eLAN dimming, external pulse input, 5-point linearity correction over 16-bit resolution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPX-TB-80\u003c\/td\u003e\n\u003ctd\u003eHigh-uniformity model with a wide dimming range\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue, amber\u003c\/td\u003e\n\u003ctd\u003ePulse control, high-speed dimming, 8-bit \/ 10-bit \/ 12-bit digital dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPX-TB-07 \/ TB-30 \/ TB-70\u003c\/td\u003e\n\u003ctd\u003eThree smaller members of the SPX-TB family for installations with limited mounting space\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue, amber\u003c\/td\u003e\n\u003ctd\u003e8-bit and 10-bit digital dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPX-N80\u003c\/td\u003e\n\u003ctd\u003eCost-performance model for general inspection lines\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue, amber\u003c\/td\u003e\n\u003ctd\u003eConstant-illuminance control, 8-bit digital dimming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPX-iT\u003c\/td\u003e\n\u003ctd\u003ePatented optical design aimed at fluorescent-lamp-class uniformity at a higher brightness\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003ctd\u003eConstant-illuminance control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPX-SLIM2\u003c\/td\u003e\n\u003ctd\u003eSlim housing intended as a direct replacement for fluorescent tube lighting\u003c\/td\u003e\n\u003ctd\u003eWhite, red, green, blue\u003c\/td\u003e\n\u003ctd\u003eConstant-illuminance control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eDetailed specifications for each model are confirmed at the time of quotation, because the housing length, light distribution, and color are all build-to-order. Custom light source configurations are also available on request.\u003c\/p\u003e\n\u003ch2\u003eHow to choose a line light\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eStart from the light-emitting length, not the product name.\u003c\/strong\u003e The illuminated band has to cover the full web or part width that the line-scan camera sees, with margin at both ends. On the SPX-TA200 the length is specified in 120 mm increments from 240 mm to 3,960 mm, and the usable (effective) length is shorter than the nominal length, so confirm the figure against your field of view before fixing the mechanical design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMatch the light distribution to the working distance.\u003c\/strong\u003e A diffuse configuration without focusing optics gives the broadest, most forgiving band and is the right default for close working distances. A focused configuration concentrates the output at a defined working distance for higher irradiance, and a quasi-collimated configuration is used where the beam has to stay narrow over a longer throw. Changing distribution changes the irradiance at the sample by a large factor, so decide this together with the camera exposure time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eChoose the color or wavelength by contrast, not by brightness.\u003c\/strong\u003e White is the general-purpose choice; red, green, blue, and amber are used to suppress or enhance specific surface features; UV at 365, 385, and 405 nm is used for fluorescence inspection; and NIR at 860 and 950 nm penetrates some materials that are opaque in the visible range. See our application guides on \u003ca href=\"\/pages\/uv-leds-for-fluorescence-inspection\"\u003eUV LEDs for fluorescence inspection\u003c\/a\u003e and \u003ca href=\"\/pages\/nir-leds-for-aoi\"\u003eNIR LEDs for automated optical inspection\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDecide how the light will be controlled.\u003c\/strong\u003e Constant-illuminance models hold a fixed output and need no host integration. Digital dimming models accept 8-bit, 10-bit, or 12-bit commands. The SPX-TA200 is dimmed over a direct LAN connection, and the optional CB-ZERO control box adds manual panel dimming, 0-5 V analog dimming, and RS-232C serial control when the inspection system expects one of those interfaces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck uniformity and response together.\u003c\/strong\u003e Longitudinal uniformity determines how much shading correction the vision software has to apply, and the switching response determines whether the light can be strobed in step with the camera. Pulse-capable models can be synchronized to each scan line, which is what makes it possible to capture transmitted and reflected images within a single pass.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo not forget the power supply and the cable.\u003c\/strong\u003e The dedicated power supply is selected by light-emitting length, and the cable length is part of the model number. Pulsed operation limits the maximum cable run, so the distance between the control cabinet and the light has to be settled before the quote is finalized.\u003c\/p\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eLine-scan defect inspection of film, glass, color filters, TFT panels, semiconductor wafers, and OLED substrates; web inspection of functional films, nonwoven materials, paper, and foil; print and label inspection; fluorescence inspection of coatings and adhesives with the UV models; near-infrared inspection of materials that are opaque in the visible range; and cleanroom installations where cooling fans cannot be used.\u003c\/p\u003e\n\u003ch2\u003eRelated products and emitters\u003c\/h2\u003e\n\u003cp\u003eFor fiber-coupled spot and ring illumination, see our \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003efiber optic illuminators\u003c\/a\u003e. For pulsed drive electronics, see our \u003ca href=\"\/collections\/led-drivers\"\u003ehigh-speed LED drivers\u003c\/a\u003e. For bare emitters across UV, visible, NIR, and SWIR, see all \u003ca href=\"\/collections\/machine-vision-led\"\u003emachine vision LED emitters\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003ePricing and lead time\u003c\/h2\u003e\n\u003cp\u003eAll products are quoted individually, because pricing depends on the light-emitting length, LED color, light distribution, power supply, cable length, and options. These illuminators are built to order, so lead time depends on the configuration and on component availability, and we confirm it with every quote. Use the Request a Quote form on any product page, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e for non-standard requirements, or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThese products are purchased in the United States from TeraPower LED. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site, so there is no need to order from Japan or import the devices yourself.\u003c\/p\u003e\n\u003cp\u003eFor more on our distributor status and frequently asked questions, see \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSee all REVOX light sources and drivers on our \u003ca href=\"\/collections\/illumination-systems\"\u003eillumination systems\u003c\/a\u003e page, or browse bare \u003ca href=\"\/collections\/led-emitters\"\u003eLED emitters\u003c\/a\u003e if you are designing your own illuminator.\u003c\/p\u003e","products":[{"product_id":"revox-spx-ta200-led-line-light","title":"REVOX SPX-TA200 - LED Line Light for Line-Scan Inspection","description":"\u003ch4\u003eREVOX SPX-TA200 - LED Line Light for Line-Scan Inspection\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-TA200 is the flagship high-performance LED line light of the SPX series, built to make the invisible visible under a line-scan camera. One housing covers ultraviolet, visible, and near-infrared wavelengths, light-emitting lengths run from 240 mm to 3,960 mm in 120 mm increments, and the 1 µs pulse response lets a single scan line capture transmitted and reflected inspection at the same time. Extensive thermal simulation and testing optimized the drive current, materials, and housing for natural convection cooling, so no forced-air or water cooling is required in cleanrooms or in web inspection of functional films and nonwoven materials. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: flagship high-performance LED line light of the SPX series, for line-scan cameras\u003c\/li\u003e\n\u003cli\u003eLED color \/ wavelength: white, red, green, blue, UV 365 nm \/ 385 nm \/ 405 nm, NIR 860 nm \/ 950 nm\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 240-3,960 mm in 120 mm increments (UV models 240-3,000 mm)\u003c\/li\u003e\n\u003cli\u003eEffective light-emitting length: light-emitting length minus 160 mm, for models of 360 mm and longer\u003c\/li\u003e\n\u003cli\u003eLight-emitting area width: 20 mm\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 113) x W 136.3 x H 60 mm; housing width of the UV models is 137.8 mm\u003c\/li\u003e\n\u003cli\u003ePower consumption: 375 W\/m at maximum intensity\u003c\/li\u003e\n\u003cli\u003eUniformity: within ±5% over a wide dynamic range of 10-100%\u003c\/li\u003e\n\u003cli\u003eResponse performance: rise time (OFF to ON) 1 µs, fall time (ON to OFF) 500 ns, at 100% output with external pulse input through the BNC connector; operation is shown with a 100 kHz external pulse\u003c\/li\u003e\n\u003cli\u003eDimming control: external dimming by LAN control, with the LAN cable connected directly to the light\u003c\/li\u003e\n\u003cli\u003eHigh-speed dimming: the dimming level changes within 90.66 µs (theoretical value) after the command is received\u003c\/li\u003e\n\u003cli\u003eLinearity correction: 5-point block correction over 65,536 levels (16-bit)\u003c\/li\u003e\n\u003cli\u003eCooling: natural convection housing, no forced-air or water cooling required\u003c\/li\u003e\n\u003cli\u003eHousing material: aluminum alloy\u003c\/li\u003e\n\u003cli\u003eMounting holes: none, slide nuts are used\u003c\/li\u003e\n\u003cli\u003eGrounding: M4 grounding screws, provided on both sides\u003c\/li\u003e\n\u003cli\u003eMain cable: 1 m pigtail on the light head; dedicated cable up to 50 m for normal operation and up to 20 m for pulse lighting\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-30 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: 0-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eAlarm output: LED open-circuit error output, LED overtemperature error output\u003c\/li\u003e\n\u003cli\u003eDiffuser: proprietary UV-resistant diffuser lens on the SPX-TA200-UV models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-TA200①-L②-③-④: ① main cable connector orientation (standard = no designation, side = S, bottom = B), ② light distribution (N = diffuse without focusing optics, A = focused at WD 100 mm, C = quasi-collimated general purpose), ③ light-emitting length 240-3,960 mm in 120 mm increments, ④ LED color (W, R, G, B, UV365, UV385, UV405, IR860, IR950). The 365, 385, and 405 nm models are available only in the N configuration and in light-emitting lengths of 240-3,000 mm\u003c\/li\u003e\n\u003cli\u003eDedicated power supply PB-300S \/ PB-600S \/ PB-1000S \/ PB-1500S \/ PB-2000S, AC 100-240 V 50\/60 Hz ±10%, selected by light-emitting length: 240-600 mm uses PB-300S, 720-1,200 mm uses PB-600S, 1,320-1,920 mm uses PB-1000S, 2,040-3,000 mm uses PB-1500S, and 3,120-3,960 mm uses PB-2000S. Green LED lights take the -G suffix. Installation clearance is 100 mm at the front and 100 mm at the rear, and the operating environment is 5-40 °C, 20-80 %RH\u003c\/li\u003e\n\u003cli\u003eDedicated cable CBL-TAJ1, specified by length, with JAE connectors at both ends\u003c\/li\u003e\n\u003cli\u003eOption: CB-ZERO external control box, H100 x D90 x W120 mm, approximately 520 g, DC 8-24 V input with an AC adapter for 100-240 V 50\/60 Hz, maximum 1.4 W. It adds manual panel dimming, 0-5 V analog dimming, 10-bit and 12-bit digital dimming, and RS-232C serial dimming, and provides the same LED open-circuit and overtemperature alarm outputs. Dimming lock applies to analog input only\u003c\/li\u003e\n\u003cli\u003eOption: LA and LC condenser lenses, which concentrate the output and raise relative illuminance compared with the no-lens configuration\u003c\/li\u003e\n\u003cli\u003eOption: LAN cable clamp for the light head\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLine-scan defect inspection of film, glass, color filter, TFT, semiconductor, and OLED substrates\u003c\/li\u003e\n\u003cli\u003eWeb inspection of high-performance films and nonwoven fabrics\u003c\/li\u003e\n\u003cli\u003eCleanroom installations where cooling fans cannot be used\u003c\/li\u003e\n\u003cli\u003eSimultaneous transmitted and reflected inspection within a single scan line\u003c\/li\u003e\n\u003cli\u003eFluorescence and UV inspection with the 365 \/ 385 \/ 405 nm models\u003c\/li\u003e\n\u003cli\u003eNear-infrared inspection with the 860 \/ 950 nm models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, camera, and line speed, and we will confirm the exact model number, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-TA200 is supplied as a system rather than a single part number. Every order combines the light head, the matching PB series power supply, and a dedicated CBL-TAJ1 cable, with the CB-ZERO control box and the LA or LC condenser lenses added when the application needs them. Because the light-emitting length, light distribution, and LED color are all specified at the time of order, we build the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site — there is no need to order from Japan or import the system yourself. Questions on light-emitting length, light distribution, wavelength selection, dimming control, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/REVOX_SPX-TA200_Catalog_EN.pdf?v=1791238777\" title=\"REVOX SPX-TA200 catalog\" rel=\"noopener\" target=\"_blank\"\u003e📄 Download Datasheet (PDF)\u003c\/a\u003e — manufacturer's catalog. For U.S. pricing, lead time, and configuration support, contact TeraPower LED at \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light-emitting length, LED color, light distribution, power supply, cable length, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67644964831520,"sku":"SPX-TA200","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX_TA200_top_s3.jpg?v=1791240102"},{"product_id":"revox-spx-tb80-led-line-light","title":"REVOX SPX-TB-80 - LED Line Light with High-Speed Dimming","description":"\u003ch4\u003eREVOX SPX-TB-80 - LED Line Light with High-Speed Dimming\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-TB-80 is a high-uniformity LED line light for line-scan inspection, designed around dimming response rather than raw brightness alone. It is the first in the series to add a high-speed dimming pulse function: the output rises in approximately 300 ns and the light can be pulsed at up to 200 kHz, so a single light can serve several optical setups in sequence instead of installing one light per imaging condition. The linearity block correction of the SPX-TA family is strengthened here with two selectable range modes, full range and partial range, which keeps uniformity usable at low output levels and lets one light cover workpieces from low to high reflectance. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: high-uniformity LED line light with high-speed dimming and pulse operation, for line-scan cameras\u003c\/li\u003e\n\u003cli\u003eLED color: white, red 1, red 2, green, blue, amber\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 120-3,960 mm in 120 mm increments\u003c\/li\u003e\n\u003cli\u003eEffective light-emitting length: light-emitting length minus 160 mm, for models of 360 mm and longer\u003c\/li\u003e\n\u003cli\u003eLight-emitting area width: 26 mm\u003c\/li\u003e\n\u003cli\u003eMaximum illuminance: 450,000 lx or higher, specified on a white LED basis\u003c\/li\u003e\n\u003cli\u003eResponse performance: rise time approximately 300 ns (maximum), the fastest in the series to date; high-speed strobe mode control is supported, with a maximum pulse performance of 200 kHz\u003c\/li\u003e\n\u003cli\u003eLinearity correction: block correction with two range modes, full range and partial range; dimming is not perfectly linear at the two transition points published by REVOX\u003c\/li\u003e\n\u003cli\u003ePower consumption: 267 W\/m at maximum illuminance\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 120) x W 50 x H 70 mm\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 50,000 hours, defined as the time until the initially set maximum luminous flux falls to 70% with a housing temperature between 0 and 50 °C; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eCable length with the dedicated CBL-N-TB cable: up to 50 m for normal operation, up to 20 m for pulse lighting, which is the maximum length that still satisfies the pulse response specification\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -10-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCompliance: EU RoHS compliant; CE marking with safety standards EN61010-1 and EN62311 and EMC standards EN61000-4-2, EN61000-4-3, and EN61000-4-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-TB80-②-③-④-⑤-⑥-⑦: ① illuminance and dimming range class (450,000 lx or higher = 80), ② end connector orientation (front exit at both ends, standard = NN; straight exit = MS), ③ light-emitting length (0120 to 3960 in 120 mm increments), ④ LED color (white = WHT, red 1 = RED, red 2 = OSR, green = GRN, blue = BLU, amber = AMB), ⑤ housing surface screws (standard = N, stainless steel = S), ⑥ air purge fitting hole (none = NP; inlet on the side = SP, for NN ends only; inlet on the front = FP and inlet on the rear = RP, for MS ends only), ⑦ emitting surface cover (clear flat resin cover, t = 3 mm = CLR)\u003c\/li\u003e\n\u003cli\u003eDedicated power supply CB-TB-600 or CB-TB-1200, selected by light-emitting length: 120-2,520 mm uses the 600 W supply (model code 0600) and 2,640-3,960 mm uses the 1,200 W supply (model code 1200). AC 100-240 V 50\/60 Hz ±10%, H 177 x D 250 x W 140 mm, approximately 3.5 kg and 4.3 kg respectively, 3-pin AC inlet with an AC 125 V cord supplied as standard. Installation clearance is 100 mm at the front and 100 mm at the rear, and the operating environment is 5-40 °C, 20-80 %RH\u003c\/li\u003e\n\u003cli\u003ePower supply control inputs: manual dimming on the front panel, external voltage dimming at DC 0-5 V, digital dimming by external 8-bit (256 levels) or 10-bit (1,024 levels) input in partial range and 12-bit input in full range (3,072 levels as published by REVOX), ON\/OFF pulse control by external signal with the optional LVDS differential driver (model code L), dimming lock by external signal for analog input only, RS-232C serial dimming, and Ethernet (LAN) dimming\u003c\/li\u003e\n\u003cli\u003ePower supply alarm outputs: LED open-circuit error, LED overtemperature error at a thermistor temperature of 120 °C, LED temperature warning at 108 °C, communication error, and power supply fault\u003c\/li\u003e\n\u003cli\u003eDedicated cable CBL-*-TB, specified as standard type (N) or flex-resistant type (R) and by length from 5 m to 50 m in 5 m steps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLine-scan inspection that needs several lighting conditions from one light head, using high-speed dimming between frames\u003c\/li\u003e\n\u003cli\u003eStrobe illumination synchronized to a line-scan camera on a fast-moving web or conveyor\u003c\/li\u003e\n\u003cli\u003eInspection lines that mix low-reflectance and high-reflectance workpieces on the same station\u003c\/li\u003e\n\u003cli\u003eFilm, glass, sheet, and web inspection where uniformity across a long emitting length is the limiting factor\u003c\/li\u003e\n\u003cli\u003eApplications that previously required two lights at different intensities, consolidated into one light to save space\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, camera, and line speed, and we will confirm the exact model number, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-TB-80 is supplied as a system rather than a single part number. Every order combines the light head, the matching CB-TB power supply sized by light-emitting length, and a dedicated CBL-*-TB cable in the length and flex grade your installation needs, with the LVDS option added when the camera system drives the light by external pulse. Because the light-emitting length, LED color, end connector orientation, and purge and screw options are all specified at the time of order, we build the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on light-emitting length, LED color, dimming control, pulse timing, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light-emitting length, LED color, power supply, cable length and grade, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800188191008,"sku":"SPX-TB-80","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX_TB80_top.jpg?v=1792101973"},{"product_id":"revox-spx-tb-07-30-70-led-line-light","title":"REVOX SPX-TB-07\/30\/70 - LED Line Light with Pseudo-Parallel Light Distribution","description":"\u003ch4\u003eREVOX SPX-TB-07\/30\/70 - LED Line Light with Pseudo-Parallel Light Distribution\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-TB-07\/30\/70 is a family of three LED line lights that share one housing, one power supply platform, and one optical concept, and differ only in brightness class. The optics are designed around pseudo-parallel light distribution for line-scan cameras, which keeps illuminance high at longer working distances instead of losing it immediately away from the emitting surface. Because the dedicated cable supports runs of up to 50 m between the light head and the power supply, the controller can sit well away from the inspection station. Choosing the brightness class that matches the application, rather than always buying the brightest light, is the point of the series: the 07 class draws 65 W\/m where the 70 class draws 267 W\/m. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: LED line light with pseudo-parallel light distribution, for line-scan cameras\u003c\/li\u003e\n\u003cli\u003eBrightness classes, specified on a white LED basis: SPX-TB-70 at 450,000 lx or higher, SPX-TB-30 at 200,000 lx or higher, SPX-TB-07 at 25,000 lx or higher\u003c\/li\u003e\n\u003cli\u003eLED color: white, red 1, red 2, green, blue, amber\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 120-3,960 mm in 120 mm increments\u003c\/li\u003e\n\u003cli\u003eEffective light-emitting length: light-emitting length minus 160 mm, for models of 360 mm and longer\u003c\/li\u003e\n\u003cli\u003eLight-emitting area width: 26 mm\u003c\/li\u003e\n\u003cli\u003ePower consumption at maximum illuminance: 267 W\/m for SPX-TB-70, 130 W\/m for SPX-TB-30, 65 W\/m for SPX-TB-07\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 120) x W 50 x H 70 mm\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 50,000 hours, defined as the time until the initially set maximum luminous flux falls to 70% with a housing temperature between 0 and 50 °C; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eCable length with the dedicated CBL-TB cable: up to 50 m for normal operation, up to 20 m for pulse lighting\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -10-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-TB-①-②-③-④-⑤-⑥-⑦: ① brightness class (70, 30, or 07), ② end connector orientation (front exit at both ends, standard = NN; straight exit = MS), ③ light-emitting length (0120 to 3960 in 120 mm increments), ④ LED color (white = WHT, red 1 = RED, red 2 = OSR, green = GRN, blue = BLU, amber = AMB), ⑤ housing surface screws (standard = N, stainless steel = S), ⑥ air purge fitting hole (none = NP; inlet on the side = SP, for NN ends only; inlet on the front = FP and inlet on the rear = RP, for MS ends only), ⑦ emitting surface cover (clear flat resin cover, t = 3 mm = CLR). Example: SPX-TB-70-NN-0960-WHT-N-NP-CLR\u003c\/li\u003e\n\u003cli\u003eDedicated power supply CB-TB-600 or CB-TB-1200, selected by class and length: SPX-TB-70 uses the 600 W supply from 120 to 3,000 mm and the 1,200 W supply from 3,120 to 3,960 mm, while SPX-TB-30 and SPX-TB-07 use the 600 W supply across the full 120 to 3,960 mm range. AC 100-240 V 50\/60 Hz ±10%, H 177 x D 250 x W 140 mm, approximately 3.5 kg and 4.3 kg respectively, 3-pin AC inlet with an AC 125 V cord supplied as standard, 100 mm installation clearance front and rear\u003c\/li\u003e\n\u003cli\u003ePower supply control inputs: manual dimming on the front panel, external voltage dimming at DC 0-5 V, digital dimming by external 8-bit (256 levels) or 10-bit (1,024 levels) input, ON\/OFF pulse control by external signal with the optional LVDS differential driver (model code L), RS-232C serial dimming, and Ethernet (LAN) dimming\u003c\/li\u003e\n\u003cli\u003ePower supply alarm outputs: LED open-circuit error, LED overtemperature error at a thermistor temperature of 120 °C, LED temperature warning at 108 °C, communication error, and power supply fault\u003c\/li\u003e\n\u003cli\u003eDedicated cable CBL-TB, published in 5 m steps as CBL-TB-050 through CBL-TB-300 for 5 m to 30 m, with longer runs to 50 m available for normal operation\u003c\/li\u003e\n\u003cli\u003eCompliance: EU RoHS compliant; CE marking with safety standards EN61010-1 and EN62311 and EMC standards EN61000-4-2, EN61000-4-3, and EN61000-4-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLine-scan inspection at longer working distances, where pseudo-parallel distribution preserves illuminance at the surface\u003c\/li\u003e\n\u003cli\u003eInstallations where the power supply must sit in a cabinet far from the camera station, using cable runs up to 50 m\u003c\/li\u003e\n\u003cli\u003eFine defect detection on sheet, film, web, and printed material\u003c\/li\u003e\n\u003cli\u003eMulti-station lines where each station is fitted with the brightness class it actually needs, to control power and heat\u003c\/li\u003e\n\u003cli\u003eExisting SPX-TB installations that need an additional light on the same power supply and cable platform\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, camera, and line speed, and we will confirm the brightness class, exact model number, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-TB-07\/30\/70 is supplied as a system rather than a single part number. Every order combines the light head in the chosen brightness class, the matching CB-TB power supply sized by class and light-emitting length, and a dedicated CBL-TB cable in the length your installation needs, with the LVDS option added when the camera system drives the light by external pulse. Because brightness class, light-emitting length, LED color, end connector orientation, and purge and screw options are all specified at the time of order, we build the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on brightness class, light-emitting length, LED color, dimming control, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the brightness class, light-emitting length, LED color, power supply, cable length, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800261230880,"sku":"SPX-TB-07-30-70","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX_TB073070_top.jpg?v=1792102460"},{"product_id":"revox-spx-n80-led-line-light","title":"REVOX SPX-N80 - Low-Cost High-Performance LED Line Light","description":"\u003ch4\u003eREVOX SPX-N80 - Low-Cost High-Performance LED Line Light\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-N80 is the cost-focused LED line light in the SPX lineup, built to cover what visual inspection actually requires rather than every feature in the range. It reaches 400,000 lx, supports emitting lengths up to 3,960 mm, and runs on natural convection cooling even at the full 3,960 mm length with dimming set to 100%, so no fan or external cooling has to be designed into the station. An optional photodiode sensor fitted to both the light head and the power supply adds a constant illumination function, which monitors illuminance and compensates for drift so that inspection thresholds stay valid over long production runs. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: LED line light for line-scan inspection, cost-optimized model\u003c\/li\u003e\n\u003cli\u003eMaximum illuminance: 400,000 lx\u003c\/li\u003e\n\u003cli\u003eLED color: white, red, green, blue, amber\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 120-3,960 mm in 120 mm increments\u003c\/li\u003e\n\u003cli\u003eEffective light-emitting length: light-emitting length minus 160 mm, for models of 300 mm and longer\u003c\/li\u003e\n\u003cli\u003eLight-emitting area width: 26 mm\u003c\/li\u003e\n\u003cli\u003ePower consumption at maximum illuminance: 225 W\/m\u003c\/li\u003e\n\u003cli\u003eCooling: natural convection, including at 3,960 mm with dimming at 100%\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 120) x W 50 x H 70 mm\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 50,000 hours for white, red, green, and amber, and 12,000 hours for blue, defined as the time until the initially set maximum luminous flux falls to 70% with a housing temperature between 0 and 50 °C; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eConstant illumination function: optional, using photodiode sensors on the light head and power supply; not available with red LEDs\u003c\/li\u003e\n\u003cli\u003eCable length with the dedicated relay cable: up to 30 m\u003c\/li\u003e\n\u003cli\u003eOperating environment: 5-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: 0-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-N80-①-②-③: ① light-emitting length (0120 to 3960 in 120 mm increments), ② LED color (white = W, red = R, green = G, blue = B, amber = A), ③ constant illumination option (fitted = PD, omitted = blank). The PD option is not available with red LEDs\u003c\/li\u003e\n\u003cli\u003eDedicated power supply CB-N600-48 or CB-N1000-48, selected by light-emitting length. CB-N600-48 is H 97 x D 240 x W 200 mm at approximately 3.2 kg with a maximum of 600 W, and CB-N1000-48 is H 106 x D 349 x W 258 mm at approximately 5.2 kg with a maximum of 1,000 W. Both accept AC 100-240 V 50\/60 Hz ±10% and operate at 5-40 °C, 20-85 %RH\u003c\/li\u003e\n\u003cli\u003ePower supply model number CB-N①-48-②③-④: ① capacity (600 or 1000), ② dimming mode, selected as DC 0-5 V analog (A) or 8-bit digital (D), ③ LAN dimming option (L), ④ constant illumination option (PD). Manual panel dimming and RS-232C serial dimming are standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eVisual inspection lines that need high illuminance at a controlled budget\u003c\/li\u003e\n\u003cli\u003eLong-length inspection up to 3,960 mm where fan cooling is undesirable\u003c\/li\u003e\n\u003cli\u003eInspection with fixed thresholds over long runs, using the constant illumination option to hold illuminance steady\u003c\/li\u003e\n\u003cli\u003eSheet, film, web, printed material, and panel inspection with line-scan cameras\u003c\/li\u003e\n\u003cli\u003eMulti-station lines where the premium SPX-TA and SPX-TB models are reserved for the critical stations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, camera, and line speed, and we will confirm the exact model number, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-N80 is supplied as a system rather than a single part number. Every order combines the light head, the matching CB-N power supply sized by light-emitting length, and a dedicated relay cable, with the dimming mode fixed at the time of order and the constant illumination and LAN dimming options added when the application needs them. Because length, LED color, and options are all specified up front, we build the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on light-emitting length, LED color, dimming mode, the constant illumination option, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light-emitting length, LED color, power supply, cable length, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800331288864,"sku":"SPX-N80","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX-N80.jpg?v=1792102815"},{"product_id":"revox-spx-it-led-line-light","title":"REVOX SPX-iT - High-Uniformity LED Line Light for Fluorescent Lamp Replacement","description":"\u003ch4\u003eREVOX SPX-iT - High-Uniformity LED Line Light for Fluorescent Lamp Replacement\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-iT is designed for inspection lines that still run fluorescent lamps or transmission lights because earlier LED line lights could not match their uniformity. A patented optical design reaches fluorescent-lamp-class ripple and uniformity without a diffuser plate, which is how the SPX-iT delivers several times the brightness of the lamps it replaces instead of trading brightness away for evenness. The emitting slit is specified from 1 to 5 mm in 1 mm steps, so the illuminated band can be matched to the camera's field rather than flooding the whole workpiece, and an optional photodiode sensor adds a constant illumination function. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: high-uniformity LED line light, recommended as a replacement for fluorescent lamps and transmission lights\u003c\/li\u003e\n\u003cli\u003eOptical design: patented optical system that achieves high uniformity without a diffuser plate, with low ripple comparable to a fluorescent lamp and several times the brightness of conventional products\u003c\/li\u003e\n\u003cli\u003eLED color: white\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 100-3,000 mm in 100 mm increments for the standard type, and 77-2,977 mm for the constant illumination type, which is 23 mm shorter because of the photodiode sensor. Lengths of 3,100 mm and above are available on request\u003c\/li\u003e\n\u003cli\u003eSlit width: 1-5 mm, specified in 1 mm steps\u003c\/li\u003e\n\u003cli\u003ePower consumption at maximum illuminance: 220 W\/m, published by REVOX as a provisional value\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 32) x W 50 x H 50 mm\u003c\/li\u003e\n\u003cli\u003eConstant illumination function: optional, using photodiode sensors on the light head and power supply\u003c\/li\u003e\n\u003cli\u003eCable length with the dedicated relay cable: up to 20 m\u003c\/li\u003e\n\u003cli\u003eOperating environment: 0-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -10-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eSpecial wavelengths: custom units with LEDs from 365 nm to 1,550 nm can be built to order\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-iT-①-②-③-④: ① light-emitting length (100 to 3,000 mm in 100 mm increments), ② LED color (white = W), ③ constant illumination option (PD), ④ slit width (1 to 5 mm in 1 mm steps)\u003c\/li\u003e\n\u003cli\u003eDedicated power supply CB-N300-48 or CB-N600-48, selected by light-emitting length: 100-1,700 mm uses CB-N300-48 at a maximum of 300 W and 1,800-3,000 mm uses CB-N600-48 at a maximum of 600 W. Both are H 97 x D 240 x W 200 mm, at approximately 2.6 kg and 3.2 kg respectively, and accept AC 100-240 V 50\/60 Hz ±10%, operating at 5-40 °C, 20-85 %RH\u003c\/li\u003e\n\u003cli\u003ePower supply control: manual panel dimming and RS-232C serial dimming as standard, with either DC 0-5 V analog dimming or 8-bit digital dimming selected at the time of order, and LAN dimming and the constant illumination function available as options\u003c\/li\u003e\n\u003cli\u003ePower supply model number CB-N①-48-②③-④: ① capacity (300 or 600), ② dimming mode (analog = A, 8-bit digital = D), ③ LAN dimming option (L), ④ constant illumination option (PD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eDirect replacement of fluorescent lamps and transmission lights on existing inspection lines\u003c\/li\u003e\n\u003cli\u003eTransmitted-light inspection of film, glass, and sheet, where ripple in the illumination shows up directly in the image\u003c\/li\u003e\n\u003cli\u003eLine-scan inspection that previously required a diffuser plate and lost brightness because of it\u003c\/li\u003e\n\u003cli\u003eApplications that need a narrow illuminated band matched to the camera field, using the 1-5 mm slit options\u003c\/li\u003e\n\u003cli\u003eLong-run inspection with fixed thresholds, using the constant illumination option\u003c\/li\u003e\n\u003cli\u003eNon-visible inspection with custom units built with 365 nm to 1,550 nm LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, camera, and line speed, and we will confirm the exact model number, slit width, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-iT is supplied as a system rather than a single part number. Every order combines the light head with its light-emitting length and slit width, the matching CB-N power supply sized by length, and a dedicated relay cable, with the dimming mode fixed at the time of order and the constant illumination and LAN dimming options added when the application needs them. Because the slit width and length cannot be changed after build, we work through the optical layout with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on slit width, light-emitting length, dimming mode, custom wavelengths, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light-emitting length, slit width, power supply, cable length, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800354455840,"sku":"SPX-iT","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX_iT_top.jpg?v=1792103068"},{"product_id":"revox-spx-slim2-led-line-light","title":"REVOX SPX-SLIM2 - Slim LED Line Light for Fluorescent Lamp Replacement","description":"\u003ch4\u003eREVOX SPX-SLIM2 - Slim LED Line Light for Fluorescent Lamp Replacement\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SPX-SLIM2 is the slim-profile LED line light in the SPX lineup, intended to drop into the space a fluorescent lamp already occupies. The housing is 25 mm high and 45 mm wide for lengths up to 960 mm, so it fits inside machine frames and conveyor gaps where a 70 mm-high inspection light will not go. Uniformity is specified at ±10% with dimming over the full 0-100% range, and power consumption is 70 W\/m, which is the trade the SPX-SLIM2 makes: it is not the brightest light in the range, but it replaces fluorescent lighting with LED life and efficiency without redesigning the mechanics around it. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: slim-profile LED line light, recommended as a replacement for fluorescent lamps\u003c\/li\u003e\n\u003cli\u003eLED color: white, red, green, blue\u003c\/li\u003e\n\u003cli\u003eLight-emitting length: 120-3,960 mm in 120 mm increments\u003c\/li\u003e\n\u003cli\u003eIlluminance uniformity: ±10%\u003c\/li\u003e\n\u003cli\u003eDimming range: 0-100%\u003c\/li\u003e\n\u003cli\u003ePower consumption at maximum illuminance: 70 W\/m\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: L (light-emitting length + 80) x W 45 x H 25 mm for lengths of 120-960 mm, and L (light-emitting length + 80) x W 85 x H 25 mm for lengths of 1,080-3,960 mm, which are supplied with side L-brackets\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 50,000 hours, defined as the time until the initially set maximum luminous flux falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eCable length with the dedicated relay cable: up to 20 m\u003c\/li\u003e\n\u003cli\u003eOperating environment: 0-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: 0-60 °C, 20-85 %RH, no condensation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eLight head, ordered as SPX-SLIM2-①-②: ① light-emitting length (120 to 3,960 mm in 120 mm increments), ② LED color (white = W, red = R, green = G, blue = B)\u003c\/li\u003e\n\u003cli\u003eDedicated power supply CB-SLIM2-150, CB-SLIM2-240, or CB-SLIM2-300, selected by light-emitting length, with maximum outputs of 150 W, 240 W, and 300 W. The 150 W and 240 W units are H 97 x D 205 x W 185 mm at approximately 2.3 kg and 2.4 kg, and the 300 W unit is H 97 x D 285 x W 235 mm at approximately 2.7 kg. All accept AC 100-240 V 50\/60 Hz ±10% and operate at 5-40 °C, 20-85 %RH\u003c\/li\u003e\n\u003cli\u003ePower supply control: manual panel dimming and RS-232C serial dimming as standard, with either DC 0-5 V analog dimming or 8-bit digital dimming selected at the time of order, and LAN dimming and the constant illumination function available as options\u003c\/li\u003e\n\u003cli\u003ePower supply model number CB-SLIM2-①-②③-④: ① capacity (150, 240, or 300), ② dimming mode (analog = A, 8-bit digital = D), ③ LAN dimming option (L), ④ constant illumination option (PD)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing fluorescent lamps on existing inspection and assembly lines without modifying the mounting space\u003c\/li\u003e\n\u003cli\u003eInstallations with tight clearance inside machine frames, conveyor gaps, and enclosures, where a 25 mm housing height is the deciding factor\u003c\/li\u003e\n\u003cli\u003eGeneral inspection, sorting, and operator-assist lighting that needs even illumination rather than maximum illuminance\u003c\/li\u003e\n\u003cli\u003eLong-length lighting up to 3,960 mm at low power, at 70 W\/m\u003c\/li\u003e\n\u003cli\u003eFacilities standardizing on LED lighting for life and energy consumption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Custom light source configurations are also available upon request, so tell us your inspection width, working distance, available mounting space, and camera, and we will confirm the exact model number, power supply, and cable configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SPX-SLIM2 is supplied as a system rather than a single part number. Every order combines the light head in the chosen length and LED color, the matching CB-SLIM2 power supply sized by length, and a dedicated relay cable, with the dimming mode fixed at the time of order. Lengths of 1,080 mm and above are supplied with side L-brackets, which changes the installed width, so we confirm the mounting arrangement with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single light with its power supply and cable is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on light-emitting length, LED color, mounting clearance, dimming mode, and power supply sizing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the light-emitting length, LED color, power supply, cable length, and options. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800375558432,"sku":"SPX-SLIM2","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SPX-SLIM_2_1800x1000_d58bb4dc-264c-477e-bcc9-2a912559a2ff.jpg?v=1792103307"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/collections\/SPX_TB80_top.jpg?v=1792175787","url":"https:\/\/terapowerled.com\/collections\/led-line-lights.oembed","provider":"TeraPower LED","version":"1.0","type":"link"}