{"product_id":"revox-slg-150v-uv-fiber-optic-illuminator","title":"REVOX SLG-150V-UV - UV Fiber Optic Illuminator (365, 385, 405 nm)","description":"\u003ch4\u003eREVOX SLG-150V-UV - UV Fiber Optic Illuminator (365, 385, 405 nm)\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-150V-UV is a near-ultraviolet fiber optic illuminator built around UV LEDs developed by REVOX, for fluorescence observation and for fine defect inspection where UV excitation produces contrast that visible light cannot. Three peak wavelengths are available as standard, 365 nm, 385 nm, and 405 nm, so the excitation can be matched to the fluorescent material or the resin being inspected. REVOX publishes an expected LED life of 30,000 hours, more than twenty times that of a UV lamp, which removes the lamp replacement and warm-up cycle from the inspection process. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: near-ultraviolet LED fiber optic illuminator\u003c\/li\u003e\n\u003cli\u003eLED peak wavelength, typical: 365 nm, 385 nm, or 405 nm, specified at the time of order\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-14 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° or 40° full angle, specified at the time of order\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, published by REVOX as more than twenty times the life of a UV lamp; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 170 VA\u003c\/li\u003e\n\u003cli\u003eEarth leakage current: 0.5 mA max at AC 240 V, 60 Hz, 100% load\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 5-40 °C, 20-80 %RH, no condensation; altitude 2,000 m maximum, overvoltage category II, pollution degree 2\u003c\/li\u003e\n\u003cli\u003eStorage environment: -15-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling\u003c\/li\u003e\n\u003cli\u003ePhotobiological safety: risk group 3. Appropriate eye and skin protection and interlocking are required in the installation\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy, anodized\u003c\/li\u003e\n\u003cli\u003eMass: approximately 3.9 kg\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant; CE marking with safety standard EN61010-1 and EMC standards EN61000-6-2, EN61000-6-4, and EN62311\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-150V-①-②③: ① peak wavelength (365 nm = 365, 385 nm = 385, 405 nm = 405), ② compatible fiber bundle diameter (Ø8-14 mm = M), ③ beam angle (30° = N, 40° = U)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator. UV transmission depends on the light guide material, so the light guide is selected together with the wavelength\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual and a 2 m three-pin grounded AC cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eFluorescence observation and fluorescent penetrant inspection\u003c\/li\u003e\n\u003cli\u003eFine defect inspection on resin, film, and coated surfaces, where UV excitation raises contrast\u003c\/li\u003e\n\u003cli\u003eChecking fluorescent markers, adhesives, and coatings for presence, coverage, and uniformity\u003c\/li\u003e\n\u003cli\u003eUV curing and exposure work at small spot sizes through a light guide\u003c\/li\u003e\n\u003cli\u003eReplacing UV lamps in existing inspection stations, to remove warm-up time and lamp replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us the fluorescent material or defect you are targeting, the working distance, and the camera and filter set, and we will confirm the wavelength, beam angle, light guide, and ferrule configuration. If you need wavelengths outside 365-405 nm, we also supply REVOX UV COB and SMD emitters at the component level.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-150V-UV is supplied as a system rather than a single part number. The peak wavelength and the beam angle are fixed when the unit is built, and the light guide has to transmit the chosen wavelength, so the illuminator, light guide, and ferrule adaptor are specified together. We work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on excitation wavelength, light guide transmission, beam angle, and UV safety classification are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the wavelength, beam angle, light guide, and ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/uv-led\"\u003eUV LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/uv-leds-for-fluorescence-inspection\"\u003eUV LEDs for fluorescence inspection\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800788074784,"sku":"SLG-150V-UV","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/slg-150v-uv_main.jpg?v=1792106052","url":"https:\/\/terapowerled.com\/products\/revox-slg-150v-uv-fiber-optic-illuminator","provider":"TeraPower LED","version":"1.0","type":"link"}