{"product_id":"revox-slg-450tsl-rgb-fiber-optic-illuminator","title":"REVOX SLG-450TSL \/ 450TSL-ST - RGB Mixed-Color Fiber Optic Illuminator","description":"\u003ch4\u003eREVOX SLG-450TSL \/ 450TSL-ST - RGB Mixed-Color Fiber Optic Illuminator\u003c\/h4\u003e\n\u003ch5\u003eDescription\u003c\/h5\u003e\n\u003cp\u003eThe REVOX SLG-450TSL carries red, green, and blue LEDs in a single fiber optic illuminator and mixes them into one output, which gives a spectrum that can be tuned to the material instead of accepting the fixed spectrum of a white source. REVOX publishes a converted illuminance of more than ten million lux based on its own measurement method, making this the brightest mixed-color source in the SLG series. A color-lock function keeps the mixing ratio fixed while the overall level is dimmed, so the color balance established during setup is not lost when the operator changes brightness. The SLG-450TSL supports steady and pulsed operation with high-speed strobe and high-speed dimming functions, while the SLG-450TSL-ST is the continuous-output version for applications that do not need pulsing. TeraPower LED is the authorized United States distributor of REVOX, Inc.\u003c\/p\u003e\n\u003ch5\u003eSpecifications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: ultra-high-brightness mixed-color LED fiber optic illuminator with three LED channels\u003c\/li\u003e\n\u003cli\u003eModels: SLG-450TSL with high-speed strobe and high-speed dimming, and SLG-450TSL-ST without them\u003c\/li\u003e\n\u003cli\u003eLED colors: red 622 nm, green 520 nm, blue 450 nm\u003c\/li\u003e\n\u003cli\u003eIlluminance: more than 10,000,000 lx, published by REVOX as a converted value based on its own measurement method\u003c\/li\u003e\n\u003cli\u003eCompatible fiber bundle diameter: Ø8-Ø12 mm\u003c\/li\u003e\n\u003cli\u003eBeam angle: 30° full angle\u003c\/li\u003e\n\u003cli\u003eDrive method: constant current, with dimming by current control\u003c\/li\u003e\n\u003cli\u003eDimming range and resolution: 0-100%, with 8-bit (256 levels) and 10-bit (1,024 levels) inputs\u003c\/li\u003e\n\u003cli\u003eControl inputs: manual dimming and Ethernet dimming\u003c\/li\u003e\n\u003cli\u003eAlarm outputs: temperature error, temperature warning, LED open error, LED short error, feedback error, and internal errors covering power supply fault, overcurrent, fan fault, and internal component overtemperature\u003c\/li\u003e\n\u003cli\u003eInput power: AC 100-240 V (±10%), 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003ePower consumption, typical: 435 VA at 100 V and 480 VA at 240 V for the SLG-450TSL; 420 VA at 100 V and 435 VA at 240 V for the SLG-450TSL-ST\u003c\/li\u003e\n\u003cli\u003eInrush current, typical: 40 A at cold start\u003c\/li\u003e\n\u003cli\u003eWithstand voltage and insulation resistance (input to output, input to FG): AC 1,500 V for 1 minute with a 10 mA cutoff, DC 500 V at 20 MΩ or above\u003c\/li\u003e\n\u003cli\u003eOperating environment, indoor use only: 0-40 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eStorage environment: -10-60 °C, 20-80 %RH, no condensation\u003c\/li\u003e\n\u003cli\u003eCooling: forced cooling by fan, with side intake and rear exhaust\u003c\/li\u003e\n\u003cli\u003eExpected LED life: 30,000 hours, defined as the time until illuminance falls to 70%; this is a reference value, not a warranty period\u003c\/li\u003e\n\u003cli\u003eDimensions excluding protrusions: D 280 x W 155 x H 200 mm\u003c\/li\u003e\n\u003cli\u003eMass: 6.0 kg or less for the SLG-450TSL, 5.6 kg or less for the SLG-450TSL-ST\u003c\/li\u003e\n\u003cli\u003eHousing: aluminum alloy with a semi-gloss leather-tone finish\u003c\/li\u003e\n\u003cli\u003eCompliance: RoHS compliant and conforming to the Japanese Electrical Appliance and Material Safety Act; CE marking with safety standards EN61010-1:2010+A1:2019 and EN62311:2008 and EMC standards EN61000-6-2 and EN61000-6-4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eSystem components\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eIlluminator, ordered as SLG-450TSL-①: ① pulse capability (pulse specification = blank, continuous-output specification = ST)\u003c\/li\u003e\n\u003cli\u003eLight guide: selected separately. Straight, ring, and line light guides are configured to the application, and the light guide is not included with the illuminator\u003c\/li\u003e\n\u003cli\u003eFerrule adaptor: selected separately to match the light guide dimensions, with custom ferrule specifications available\u003c\/li\u003e\n\u003cli\u003eSupplied accessories: instruction manual, a 2 m three-pin grounded AC cord, and a plug for the monitor terminal block\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch5\u003eApplications\u003c\/h5\u003e\n\u003cul\u003e\n\u003cli\u003eInspection where contrast depends on wavelength, using a mixing ratio tuned to the material rather than a fixed white spectrum\u003c\/li\u003e\n\u003cli\u003eColor imaging that must stay color-stable while brightness is adjusted, using the color-lock function\u003c\/li\u003e\n\u003cli\u003eHigh-magnification inspection that needs extreme brightness through a fiber light guide\u003c\/li\u003e\n\u003cli\u003eStrobe and high-speed dimming applications synchronized to a camera, using the SLG-450TSL\u003c\/li\u003e\n\u003cli\u003eContinuous illumination at a fixed level, using the lower-cost SLG-450TSL-ST\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSpecifications above are taken from the REVOX product documentation. Tell us your material, working distance, camera, and whether you need pulsed or continuous output, and we will confirm the model, light guide, and ferrule configuration.\u003c\/p\u003e\n\u003ch2\u003eOrdering and sourcing information\u003c\/h2\u003e\n\u003ch3\u003eHow this product is configured\u003c\/h3\u003e\n\u003cp\u003eThe SLG-450TSL is supplied as a system rather than a single part number. The pulse capability is fixed by the model you order, because the high-speed strobe and high-speed dimming functions cannot be added to an SLG-450TSL-ST afterwards. The illuminator, the light guide, and the ferrule adaptor are specified together, since the light guide determines the illuminance delivered at the workpiece, so we work through the configuration with you before quoting.\u003c\/p\u003e\n\u003ch3\u003eMinimum order quantity\u003c\/h3\u003e\n\u003cp\u003eThere is no minimum order quantity. A single illuminator with its light guide is handled exactly like a production order, so evaluation units are quoted the same way as line deployments.\u003c\/p\u003e\n\u003ch3\u003eLead time\u003c\/h3\u003e\n\u003cp\u003eThese illuminators are built to order at the factory, so lead time depends on the configuration and on component availability. Orders are shipped either direct from REVOX in Kanagawa, Japan, or through our Torrance, California office. We confirm the shipping route and the lead time with every quote, so the delivery schedule is fixed before you commit to an order.\u003c\/p\u003e\n\u003ch3\u003eU.S. purchasing and technical support\u003c\/h3\u003e\n\u003cp\u003eYou can buy this illuminator in the United States from TeraPower LED, the authorized United States distributor of REVOX, Inc. You order from and are invoiced by a U.S. company in Torrance, California, and we handle export, import, customs clearance, and delivery to your site - there is no need to order from Japan or import the system yourself. Questions on color mixing, light guide selection, ferrule sizing, and strobe timing are answered in English from the United States, with direct access to the manufacturer's engineering team in Japan whenever a question needs the designer.\u003c\/p\u003e\n\u003ch3\u003ePricing\u003c\/h3\u003e\n\u003cp\u003eThis product is quoted individually, because pricing depends on the model, the light guide, and the ferrule configuration. Use the Request a Quote form on this page or email \u003ca href=\"mailto:sales@terapowerled.com\"\u003esales@terapowerled.com\u003c\/a\u003e. For requirements outside the standard lineup, submit the \u003ca href=\"\/pages\/custom-order\"\u003eCustom Order Form\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eRelated: \u003ca href=\"\/collections\/fiber-optic-illuminators\"\u003eFiber optic illuminators (SLG series)\u003c\/a\u003e | \u003ca href=\"\/collections\/led-line-lights\"\u003eLED line lights (SPX series)\u003c\/a\u003e | \u003ca href=\"\/collections\/machine-vision-led\"\u003eMachine vision LED emitters\u003c\/a\u003e | \u003ca href=\"\/pages\/authorized-distributor\"\u003eAuthorized U.S. Distributor of REVOX\u003c\/a\u003e\u003c\/p\u003e","brand":"REVOX","offers":[{"title":"Default Title","offer_id":67800773493024,"sku":"SLG-450TSL","price":3000.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1016\/9860\/1248\/files\/SLG450TSL_in2__02.jpg?v=1792105863","url":"https:\/\/terapowerled.com\/products\/revox-slg-450tsl-rgb-fiber-optic-illuminator","provider":"TeraPower LED","version":"1.0","type":"link"}